Bias Tape Cutting Machines
Bias tape cutting machines prepare fabric strips for binding garment edges and other textile work. The way you prepare the fabric determines which Kanmak cutter to consider.
Compare the KM 1500 and KM 1700
The KM 1500 cuts prepared fabric into strips and offers cutting widths from 1 to 10 cm. The KM 1700 handles tubular fabric. Check your fabric dimensions, target strip width and blade arrangement before choosing.
Set the strip width before cutting
Start with the finished binding width. Then add any allowances for folding and sewing. Make a short test cut with the fabric you plan to run. Measure the strip without stretching it and inspect both cut edges.
Compare binding samples before deciding
Bring the cloth in the same form you plan to feed and specify whether the strip will bind a straight edge or follow a curve. Try a strip through your sewing operation and compare how it folds around the edge. The sewing result can help determine the width and grain direction you need.
When comparing cutters, record the time for preparing and loading the fabric as well as the cut itself. Include fabric or width changes when estimating the number of usable strips a shift can produce.

Go to Top